alloy

the alloying is even and easy to be broken, which reduces the preparation cost of titanium alloy.

The friction property of high, middle and low P alloying cast iron was compared with that of ordinary cast iron.

Brittleness is often a result of alloying .

The surface alloying under casting penetration is synthetically discussed.

On this basis, summary remarks are presented on the advantageous aspects and prospects of mechanical alloying as a . . .

The casting coatings: expand and strengthen the transferred coating, surface alloying paint application fields and its mechanism.

By means of spray weld alloy powder alloying of casting surfaces has come true in spraying and coating-cast technology.

At the mean time, alloying elements' solubility increases and the macro-segregation is diminished in a great degree.

Mechanical Alloying (MA) is a new and better technology used to synthesize Mg-based hydrogen storage materials.

For virtually every alloying addition, the cracking sensitivity varies as alloy content increases as shown in Figure 1.

Mechanical alloying (MA) is an attractive technique for producing equilibrium and metastable alloy phases.

The formation of the interfacial barrier layer is depended on the alloying element and its content in alloy films.

Mechanical alloying is wildly used in scientific research, but energy consumption is high in batch production.

The valence electron structures of the graphite, alloying austenite, alloying cementite in cast iron phases are researched.

Lead as an alloying element in copper (including brass and phosphor bronze) should less than 4 wt %.

The alloying elements of the cladding weld, indicated in the table, shall be checked using a proven quantitative analytical technique.

In this paper, the methods and theory of infiltration and mechanical alloying to produce Ag-W contact are recounted in detail.

Determination of the alloying content in the matrix of Zr alloys using synchrotron radiation microprobe X-ray fluorescence.

Experimental results show that the alloying cementite also exists in this new nickel cast iron, besides graphite and austenitic base.

Metal Traders or producers of primary non-ferrous metal products, encompassing all processes from smelting to alloying, rolling and drawing.

This happens in an alloying process so gold is combined with palladium to create that 'white gold' effect.

The results show that the alloying surface layer is comprised of three parts which are hypoeutectic layer, eutectoid layer and matrix.

The results show that the microstructure of laser alloying zone is compact, grain is fine, and has metallurgical bonding with matrix.

The change in strength of cryogenic austenitic steel with temperature and alloying element content was studied.

Nitriding steels, by virtue of their alloying content, are stronger than ordinary steels and respond readily to heat treatment.

On the basis of systematical study, the comprehensive effects of alloying elements in cryogenic austenitic steels were analyzed.

With the contents of Cr, C increasing, the thickness of alloying surface layer increases and the hardness improves in a large scale.

Effects of alloying elements in the stainless steel and heat treatment on microstructure and mechanical properties were analyzed.

This operation is intended to dissolve all the alloying additions in solution and hold them there at room temperature.

This paper focuses on an active brazing technique that utilizes an in-situ alloying of Ni and Ti foils to join YSZ to 444 stainless steel.

Electron beam modification process were used on the surfaces of cast aluminum alloy samples with various alloying elements.

Except Co and Al, almost all alloying elements dissolved in austenite can improve the stability of supercooled austenite.

Also the differences between solid-liquid reaction milling and mechanical alloying were presented in this thesis.

The alloying characteristics and alloy combinations of standard alloy spring steels are analysed.

A similar technique is to "glue" the small percentage of alloying element onto the iron powder.

A versatile surface alloying technique , the Xu-TEC or XU- LOY process has been developed on the basis of the plasma Nitriding.

Through control rolling and control cooling, the alloying element consumption and cost were reduced.

Moreover, alloying extent increases with the increasement of temperature and time.

Process solutions: Technology for direct steel alloying (no ferroalloys).

o 6b. Lead as an alloying element in aluminium containing up to 0. 4 % lead by weight.

Except Co and Al, almost all alloying elements dissolved in austenite can improve the hardenability of steels.

The process flows of magnesium alloy surface alloying and electrophoretic coating were introduced.

X80 pipeline steels with various alloying concepts and alloying systems can be used in the Second West-East Gas Pipeline Project.

In this paper, a new surface alloying technique, arc added glow discharge ion titanizing technique is introduced.

A simplex algorithm is used to fulfill the alloying computation. The computation result tests good and the anticipation is achieved.

Process formula and operation steps of magnesium alloy surface alloying were discussed.

The alloying elements used most often in steels are manganese, nickel, molybdenum, and chromium.

Magnetic stainless steels that have a low carbon content and contain chromium as the main alloying element, usually between 13% and 17%.

The equipment could apply to ceramic and metal surface alloying , joining alloyed ceramic and metal.

The alloying elements are molybdenum, tungsten, chromium, boron, and carbon.

o 6a. Lead as an alloying element in steel containing up to 0. 35 % lead by weight.

Alloying of metals involves melting the main ingredients together so that on cooling, the metal alloy is generally a nonporous solid.

When milling time was short, flour yield was high but alloying processing was not intensive.

Alloying small quantities of tungsten with steel greatly increases its toughness.

Plain carbon steel. A ferrous alloy in which carbon is the prime alloying element .

comparisons are made between mechanochemistry and mechanical alloying in the aspects of mechanism, application and development.

Pure gold is too soft for ordinary use and is hardened by alloying with silver, copper, and other metals.

We analysized the investigation status at present, and prospected the developing trends of mechanical alloying.

In this paper, Surface alloying process by V-EPC and application technique on guide were studied systematically, the base metal is ZG40Cr.

The paper discusses the application of LF automatic alloying technology.

Among all the ways of ignition proof of magnesium, the alloying is the most effective.

In Figure 2 are shown the results of corresponding trials with steel containing somewhat larger amounts of alloying elements.

A new hacksaw blade, double glow plasma surface alloying hand hacksaw blade, is introduced in the paper.

Alloying steel with other metals produces materials called alloy steel.

The effect of graphite morphology and alloying elements on thermal fatigue resistance of cast iron was studied.

It can be improved by inoculation, modification, alloying, high temperature prespheroidization and electron slag remelting(ESR).

The effect of powder pre- alloying on the hardness and bending strength of diamond tools matrix was studied.

In double glow plasma surface alloying(DGPSA), the alloy poorness in surface layer of the workpiece is mainly caused by two mechanisms.

Brazing by in-situ alloying of nickel and titanium foils was performed to braze zirconia to 444-stainless steel.

Influences of laser surface alloying with niobium (Nb) on the corrosion resistance of Zircaloy-4.

The surface of TiAl alloy is nitrided by CO 2 laser gaseous alloying with nitrogen.

Lead used as an alloying element in steel.

A new series of meta bainitic steels is founded by adding in appropriate amount of silicon on the alloying basis of bainitic steel.

of one or more of the following elements: nickel, tungsten, silicon and small amounts of other alloying elements.

Alloying elements react with oxygen.

The rapid surface alloying of AISI 316L stainless steel by high current pulsed electron beam(HCPEB) was investigated.

Controled rolling uses alloying , controled heating technology and rolling technology and controled cooling.

B700L is a new type of low-alloy high strength steel, which adds a lot of micro-alloying elements , produced by baosteel.

The study was carried out to investigate the effect of alloying elements on wear resistance of heat-resistant ductile iron.

In this paper the advances of several kinds of alloying elements added in the bond of metal matrix diamond tools are summarized.

However, these are only the majority of alloying elements as other elements are included such as copper, zinc, manganese and titanium.

An alloying element that is used in stainless steel to deter corrosion.

Relationship of the Fractured Surface Fractal Dimensions of a Deposited Metal to Its Alloying Element Components and Microstructure

The results indicate that when carbon atoms diffuse in the surface, decarbonized layer forms in the frontier of the alloying layer;

A study of the application of photoelectric pyrometer thermometry to a double glow plasma surface alloying process

Besides, the alloying design of SDH3 steel reduces the cost of production greatly, which has high practical value to the society.

Results show that the surface' hardness are respectively raised 110% by quenching and 180% by alloying;

Modification of the steel surface layer for better wear resistance by means of laser melting and alloying

Part-alloying on the Surface of Cast Steel by the Evaporation Pattern Process

Mechanical Alloying Technology and Its Application in Superfine Crystalline Cemented Carbide Materials

Polymer Development Though Blending and Alloying ( Cambridge Scientific Abstracts - Materials Information )

Calculation of Energy Consumption and Measurement of Loss Rate of Alloying Elements in Al-melting Furnace for Die-casting

Martensitic Transformation Study of Nanometer-Sized Fe-Ni Powders Prepared by Mechanical Alloying

Application of a New Additive in Manufacturing Steel Matrix Surface-alloying Composites

Influence of Process Parameters on Appearance and Microstructure of Light Beam Alloying Coating

Effect of the Main Alloying Elements on Microstructure and Corrosion Resistance of Magnesium Alloys

Study of Double Glow Discharge Plasma Aluminum Surface Alloying on Titanium Alloys

Research on Life of Screws of Injection Molding Machines by Laser Alloying Processing

Effects of the Main Alloying Elements on Microstructure and Properties of Magnesium Alloys

Polymer Development Through Blending and Alloying, 2nd Edition ( Cambridge Scientific Abstracts - Materials Information )

Properties of N-type Pseudo-ternary Thermoelectric Materials Prepared by Mechanical Alloying and Cold-pressing and Sintering Methods

Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry

Strengthening and Toughening of Medium Manganese Austenitic Steel with Casting Surface Composite and Surface Alloying

Mechanically Alloying Synthesis and Mechanical Properties of Nanocrystalline NiAl

Aluminum Oxide Dispersion Strengthened Copper Electrode Produced by Mechanical Alloying

Different Ceramic Particle Dispersion Strengthening Cu Alloys Prepared by Mechanical Alloying

The experience of domestic self-expanding nickel-titanium memorial alloying covered stent in the treatment of esophageal strictures

Absorbing Alloy Element Rate of Surface by Double Glow Plasma Surface Multi-Element Alloying Technique

Thermodynamic Analysis of Smelting Reduction and Direct Alloying Using Chromium Ore in Stainless Steel Smelting Process

Investigation on Laser Alloying of Nodular Cast Iron Piston Ring and Research on Characteristics of Wear Resistance of Piston Ring-cylinder

Mechanical Alloying Preparation of Intermetallic Compounds

Laser alloying on the surface of materials

Study of Preparation of Shape Memory Alloy with Mechanical Alloying

Decarbonizing of high-carbon steel under condition of ion bombarding and its effect on surface alloying

Preparation of stainless steel powder containing nitrogen by mechanical alloying technique

Improvement of High-temperature Oxidation Resistance of Niobium-based Alloys by Alloying and Coating Technology

Producing Technology of Alloying Steel Fully Continuous Casting in Small-electro-furnace Steelmaking Plant

Preparation of Antibacterial Stainless Layer with Silver by Double Glow Plasma Surface Alloying Technology

Evolution of Crystal Structure, Magnetic and Thermal Properties of Fe-C Compound during Mechanical Alloying Process

Preparation of Mo-particulate - reinforced Copper-based Composites by Mechanical Alloying

Progress in nanocrystalline cemented carbide powder produced by mechanical alloying

Effects of thermomechanical heat treatment processing on microstructures and properties of Cu-Zn alloy by minor Cr alloying

Present Development Status of Carbon Steel, Low Alloying Steel Castings in Investment Casting at Home

Research and Development on Microstructure, Properties and Alloying of Cu-Ag Filamentary Composites

Microstructures of surface alloying layer prepared by evaporable pattern casting process

Influence of Alloying Contenton Microstructure Evolution of Hot Deformed Austenite

The Influence of Carbon Content on the Hardness and Microstructure of Layer on Weld Deposit Rob with Multi-elements Alloying System

Practice on Deoxidization and Alloying Process with Silicon-manganese and Aluminium-manganese

Prospect of Forming Surface Burn-resistant Titanium Alloys by Double Glow Plasma Surface Alloying Technology

Microstructure, Preparation and Properties of Alloying Layer of High Chromium Wear-resistant on Carbon Steel

Research Progress in Nanocrystalline Materials by Mechanical Alloying

Study of Polypropylene Reactor Alloying

Martensite formation during mechanical alloying of Fe-Ni and martensitic transformation

Preparation of Nonequilibrium Materials by Mechanical Alloying

Influence of elements powder pre-alloying technology on microstructure and property of sintered alloy-steel

Manufacture and Application of the Cyclone Dust Separator Made from Low Alloying Iron Casting

Microstructure and Growth Model of TiC Dendritic Crystals Produced by Laser Surface Alloying Technique

Application of thermocouple thermometry in double glow plasma surface alloying process

Application of Mechanical alloying to Development and Research of New Materials

The Research Progression on the Kinetics of Extension Solid Solubility Induced by Mechanical Alloying

Chemical analysis of copper and copper alloys; determination of tin as alloying element, volumetric method

Effects of alloying elements on microstructure, mechanical and electrical properties of Cu-Ag based alloys

Progresses in Preparation of Electrical Contact Materials by Mechanical Alloying

Copper alloys; Determination of aluminium as alloying element; Volumetric method

Preparation of Bulk Amorphous Materials by Mechanical Alloying Powder Metallurgy

Thickness Surface Alloying Technology Ball Mill Orifice with Casting-penetration

Thermal mechanical alloying synthesis of tungsten carbide-metal composites

Formation and Thermal Stability of Co-Zr Amorphous Soft Magnetic Alloy Powders Produced by Mechanical Alloying

Composition and phase structure analysis of laser surface alloying treated layer of Nb-plated depleted uranium

Solution of diffusion equations and distribution of alloying elements in sintered materials

Recent Progress and Applications of Micro Alloying Un-hardened-and-tempered Steels to Automotive Industry

Preparation of SiC Particulate Reinforced Cu Matrix Composites by Mechanical Alloying

Development and Application of Microalloy and Multiple Alloying High-Chromium White Cast Iron Hammer

Densification and properties of iron-based sintering material with high content of alloying elements

Studies on Cu-Nb Nano-particle Dispersion Strengthened Copper Alloys Prepared by Mechanical Alloying

The main contents include (1) laser surface alloying and cladding of titanium alloys for wear , oxidation and burn resistance;

Preparation of Molybdenum Silicides by Mechanical Alloying Heat Treatment

Development and Application of Mid-carbon Low-alloying Wear-resistance Steel Hammerhead with Multi-phase

Mechanical Alloying of Ti-Al-Si-Nb System Powders and the Microstructure Characteristics after Spark Plasma Sintering

Unequilibrium Phase Transformation Products from Mechanical Alloying

Microstructures and Properties of Rocker Arm after Laser Surface Alloying Processing

Tempering Stability of Fe-base Hardfacing Layer Containing Multiple Alloying Element

Electronic theory calculations of alloying effect to amorphous alloy forming ability

Neural network prediction of corrosion resistance of plain carbon steel treated by surface alloying

Defect and Its Control in Laser Cladding and Laser Surface Alloying Process

Developing Technology of Direct Alloying of Scheelite, Molybdenum Oxide and Vanadium Slag

Study on Photoelectric Pyrometer Thermometry in the Double Glow Plasma Surface Alloying Process

Effects of the Electrochemical Property of Electroless Nickel Plating on Multi-alloying Low-Co Hydrogen Storage Alloy

Study on Micro-alloying Compacted Graphite Cast Iron Used in Glass Mould

Test Methods for Chemical Analysis of Ferrovanadium and Vanadium Alloying Additives

Nanocrystal W-Cu electrical contact material by mechanical alloying and hot pressed sintering

Study on Phase Transformation and Thermodynamic and Kinetic of Al-Pb Powder During Mechanical Alloying

Depletion of Alloying Elements and Composition Demixing in Surface Layers by Double Glow Plasma Method

Enhancing activity of platinum catalysts for PEMFC oxygen reduction reaction by alloying

Arc Furnace Steelmaking High Speed Steel by Indirect Adding and Alloying of Tungsten and Molybdenum Oxides

Influencing factors on center segregation in continuously cast Nb-V-Ti-contained micro-alloying slabs

Study on Alloy Phase Forming Process of Plating Surface during Alloying Annealing Process of Hot-dip Galvanized BH Steel Sheets

Study on alloying ingredient of terminal through the partition welding

Study on Friction and Wear Properties of Alloying Layer using Plasma Surface Alloying Technology

Metallic Phase Transformation in Mechanical Alloying

Alloying effects, Alloying methods, Alloying systems

Surface alloying of iron castings produced by EPC method using casting infiltration process

Effects of micro-alloying on microstructure and mechanical properties of in-situ composites

Application of the Alloying Nodular Cast Iron to the Plunger of Die-casting Machine

Study on the Nano-Crystalline and Amorphous Al-Pb Series Powders Synthesized by Mechanical Alloying

Preparation of Silver- Nickel Contact Materials by Mechanical Alloying

Alloying and Solidifying Techniques of NiAl Intermetallics

Novel processing of tricathode plasma surface alloying and its application

Investigation on mechanical alloying assisted by external fields

Research on the wear-resistant layer with high contents of chromium and carbon by plasmas surface alloying

Carburizing steel alloying development and the influence of alloy element to carburizing steel

fining and activating the material powder through mechanical alloying to form reaction diffusing couple;

Technics of surface alloying and electrophoretic coating of magnesium alloy

Comprehensive Effect of Alloying Elements in Cryogenic Austenitic Steels

The Alloying Reinforced Mechanical Property of Heat-Resistant Steel in Reduction Tank

Effects of Alloying Element in Zinc Bath on Formation of Spangle and Properties of Hot-Dip Galvanized Coating

Microstructure and Thermal Fatigue Behavior of Spot Array Laser Alloying for Nodular Cast Iron

Applicable Technology of Alloying Steel Sleeve in Centrifugal Casting

Mechanism of alloying of copper alloy with high strength and high electrical conductivity

Studies on Thermodynamic and Kinetic and Phase Evolution of W-Ni-Fe Powder during Mechanical Alloying

Mechanism of Amorphous Phase Synthesized by Mechanical Alloying

Copper alloys; Determination of tin as alloying element; Volumetric method

Wear-Resistant Alloying Layer of Plasma Surface Chromizing and Carburizing

Mechanical Alloying Preparation of Nano-structured Alloys

Characterization and Wear Behavior of the Electrospark Alloying Coatings

Progress of Studies on the Preparation of Hydrogen Storage Alloys by Mechanical Alloying

Effects of Alloying Elements on the Crystallization Behavior of Zr-Base Amorphous Alloys

Research of Alloying Elements for Strengthening Mechanical Properties of Mg and Mg-alloy

Researching on Micro-alloying Technology to Improve Cold Formability

The Synthesis of Thermoelectric Compound CoSi by Mechanical Alloying

Friction and Wear Property of TiN Ceramic Alloying Layer by Double Glow Discharge Plasma Process

Study on Mechanism of Casting Infiltration for Surface Alloying of Steel Castings in EPC Process

Research on Carbon Migration in Steel by the Plasma Surface Alloying Process

Effects of Alloying Elements on Corrosion Wear Behavior of Martensitic Ductile Iron

The Effect of the Silicon Content and Heat Treatment Parameters on the Structures and Properties of Low- alloying Austenitic- bainitic Steel

Research on Composition Material Alloying by Friction Stir Welding Method

Relativity of plasma parameters and process parameters in ion surface alloying

NiAl Intermetallics Powder Compounded by Method of Mechanical Alloying

Mechanical Alloying Study of Mo-Si-Co Powder Mixture

Laser Processing Equipment - Alloying

Alloying Component Controlling Model for EAF Steelmaking

Effect of Micro-alloying Elements on the Properties of Quenched and Tempered Low Alloy High Strength Steel

Progress of study on pressure vessel steels manufactured by unquenched tempered micro-alloying technology

Effects of Alloying Elements on Heat-resistant Properties of Magnesium Alloys

The Status of Investigation About Small Alloying Additions for Jewellery

Formation of nanocrystalline spinel Ni-Zn ferrite by mechanical alloying

Effect and Application of Double Glow Discharge Surface Alloying Process

Standard Specification for Aluminum Scrap for Use in Deoxidation and Alloying of Steel

Standard Specification for Titanium Scrap for Use in Deoxidation and Alloying of Steel

Effect of Graphite Morphology and Alloying Elements on Thermal Fatigue Resistance of Cast Iron

Study on the Nanometer WC Cemented Carbide Powder Produced by Mechanical Alloying

Theoretical Investigation on the Effect of Exothermic Alloying on Storage Hydrogen Materials

Chemical preparations for facilitating the alloying of metals

The Regressing Analysis on the Process Test of the Double-glow Plasma Surface Alloying

Influences of Alloying Elements on the Properties of Nickel Aluminum Bronzes

Polymer Development through Blending and Alloying

Mechanical alloying of copper-zinc powders at cryogenic conditions

Progress on Ti-based Hydrogen Storage Alloys Prepared by Mechanical Alloying

The Effects of Machine-Alloying Process to the Ag-Base Metal Matrix Composite Material

Effect of Alloying Elements on Corrosion Resistance of Ferritic Stainless Steel

Vacuum plasma alloying as surface treatment technology for Ti-materials

Behavior of Alloying Elements in Precipitation-Hardening Hot Work Steel

Study on the Process of Double Glow Plasma Surface Alloying Technique and Plasma Carbonizing of Machine Hacksaw Blade

Mechanism of Synthesis of the PLZT Powder by Mechanical Alloying

Effect of annealing process on microstructure and texture of alloying hot dip galvanized Ti-IF sheet

Structural Feature of As-cast High Cr Injection Micro-alloying Martensitic Cast Iron

Accelerating Effect of Aluminum on Synthesis of TiC during Mechanical Alloying

Production practice of alloying with silicon-carbide in converter

Fabrication of fine-grained titanium alloy by mechanical alloying

Research and Application Status of Direct Alloying in Steelmaking