ActiveDirectory

The only benefit gained from deleting an obsolete UM dial plan is to reuse the name or perform general Active Directory housekeeping.

With an Active Directory site, it is possible to partition client computers to use a particular set or group of directory resources.

Make sure that there is at least one Hub Transport server installed in the same Active Directory site as the UM server.

The Unified Messaging server encountered an error during the call with ID "%1" while trying to read from Active Directory.

This data takes the form of an NTDS Settings object that exists as a child of the server object in Active Directory Sites and Services.

Notice that the new group has no characteristics that signal it was created using Active Directory.

The next example is of a specific filter for Active Directory that explains the mapping in more detail.

Or, you may have to roll back elements of a domain controller's host operating system, including Active Directory, to a known good point.

The following table describes the settings that you can configure and the Active Directory attributes to which these settings correspond.

It should also be relatively easy to incorporate into your existing authentication schema, such as Active Directory or LDAP.

This section contains details about the least cost routing path from the current Active Directory site to any remote Active Directory site.

Any message size limits that are specified on an Active Directory site link don't affect the selection of the least cost routing path.

The replication connection object does not actually exist in Active Directory until this method is called.

This tree of domains can be one of many in a trust relationship called an Active Directory forest.

The File Distribution service will continue to try to read the offline address book object from Active Directory on an interval of one hour.

The Unified Messaging server encountered an error while trying to access Active Directory in the call with ID "%1" .

In a single forest topology, Exchange is installed into a single Active Directory forest that spans the whole organization.

When a new user is created in Active Directory, the Full name field is always generated in FirstName LastName format.

The maximum time for this process is up to one hour after Active Directory replication has completed.

Instead, use a virtual host name to avoid the name-clash with the "Computer" object in Active Directory for the Web server computer.

Enter the DNS name of the Active Directory domain to which you want to bind the computer you're configuring.

Because Exchange and Windows use Active Directory, some of these tasks are an extension of Windows Server administration.

Determine the Active Directory value of the attributes that you want to verify for that recipient.

For a half an hour, Marko made a presentation to Potokar and his team about Active Directory and its benefits and challenges.

The main advantage of the dedicated Exchange forest scenario is a security boundary between Active Directory and Exchange administration.

This event indicates that there was a problem starting the Active Directory Connector service.

This event indicates that the MTA was not able to obtain its configuration from Active Directory.

Although a relatively rare event, it is possible under high Active Directory load conditions.

Distribution groups should be one of the first sets of Active Directory objects that you create.

The Active Directory query is performed on up to 20 e-mail addresses at a time.

The advanced queuing engine and Exchange MTA query Active Directory to determine the activation schedule of a connector.

The user account associated with the mailbox will remain in Active Directory but will no longer be associated with a mailbox.

Locate the container in the Active Directory service in which you want your client accounts to be created.

The Credential parameter indicates the domain and user name of the account used to read Active Directory.

This will allow you to provision the Active Directory group and mail-enable it in a single operation.

If you do not specify a server name, Setup. Com will create a placeholder server object in Active Directory for the local server.

Class requests an extended form of the distinguished name of an Active Directory object.

If it does not resolve itself, check Active Directory for possible problems.

This field identifies the Active Directory site to which the Edge Transport server is subscribed.

Continue to let the domain controller load Active Directory from the volume that you created in step 1.

A disabled Active Directory user account cannot be used to log on to the Active Directory domain.

This cmdlet allows you to retrieve the permissions set for an Active Directory object.

Exchange will not allow two mailboxes with the same GUID to be connected simultaneously to Active Directory accounts.

The multiple base DN support feature of the AIX 5L operating system could be used to configure against such an Active Directory server.

Class contains replication information for a set of Active Directory attributes.

If the local server does not contain a replica of the public folder database, a server in the same Active Directory site is preferred.

It is also possible for the Active Directory server to have multiple organizational units defined, with each containing a set of users.

This Active Directory Group Policy Object should be used as a temporary workaround until such time as the patch can be applied.

Description: A placeholder in an inheritable ACE on an account object or group object in Active Directory.

Object containing the child entries of this node in the Active Directory hierarchy.

The Set-EmailAddressPolicy cmdlet allows administrators to set the Active Directory attributes for a specific e-mail address policy.

This data is kept up to date by periodically synchronizing changes from Active Directory to ADAM.

Describes considerations for the stable and secure deployment of Team Foundation Server in an Active Directory environment.

Zone to be stored in an Active Directory-integrated domain-wide application partition.

If you perform this kind of repair, you must rebuild the domain controller for Active Directory to be in a supported configuration.

In this topology, Exchange is installed in an Active Directory forest that does not contain the user and group accounts.

The Active Directory hierarchy contains up to several thousand nodes.

In Active Directory, a distribution group refers to any group that does not have a security context, whether it is mail-enabled or not.

The Credential parameter specifies the account used to query Active Directory for the contact's credentials.

This behavior may occur if the Hub Transport server is unable to collect the appropriate data from Active Directory.

Property gets a path to an Active Directory node to which the permissions apply.

An object that contains missing or malformed critical properties is classified by the Active Directory query as an invalid object.

The Name attribute is used for the common name (CN) in Active Directory.

The ActiveDirectoryMembershipProvider class will attempt to connect to Active Directory using SSL.

After information about the recipient is resolved, the next step is resolving the Mailbox server to an Active Directory site.

Remove Active Directory from the domain controller to force it to be a stand-alone server.

E-mail messages are not delivered to a user whose Active Directory account appears to be current.

Manages storage of membership information for an ASP. NET application in Active Directory and Active Directory Application Mode servers.

Exchange checks the public folder database object in Active Directory for a preferred backfill server.

The members of the Enterprise Admins is an essential group for an Active Directory enterprise.

Active Directory-integrated DNS is now working on your first Dynamic DNS server.

Accessing other objects that represent relationships between the Active Directory Domain Services objects named above.

Gets or sets a path to an Active Directory node to which the permissions apply.

The secure LDAP port to which the EdgeSync service binds when synchronizing data from Active Directory to ADAM.

An Active Directory environment can be composed of multiple domains in a trust relationship called a tree.

In most cases, SIDs in Windows are uniquely associated with a single account in a single Active Directory forest.

This parameter specifies the owner of that Active Directory object.

Gets the child entries of this node in the Active Directory hierarchy.

Do not place Active Directory or FRS database and log files on NTFS file system compressed volumes.

Microsoft cannot guarantee that problems that occur if you incorrectly modify Active Directory object attributes can be solved.

Explicit credentials for the Active Directory connection must be provided in the configuration file.

Companies that require security boundaries between Active Directory administration and Exchange administration typically use this option.

The administrator has not mapped the password question-and-answer fields to attributes of the Active Directory schema.

Active Directory acts as a container for all the UM objects that are created and their configuration settings.

You don't have to configure connectors between the Hub Transport servers inside the Active Directory forest.

For a domain-based DFS root, the PKT is stored in Active Directory, and is made available to each domain controller in a domain.

When adding to a custom search policy, each Active Directory domain appears separately in the list of available directory domains.

It is likely that home computers will not be members of an Active Directory domain that contains a Client Security deployment.

As part of the demotion process, the wizard removes the configuration data for the domain controller from Active Directory.

This may be due to the method that was used to install Active Directory Domain Services.

This may be due to the method that was used to install Active Directory Domain Services.

Outlook Web Access attempts to find the correct certificate in Active Directory for a recipient when sending encrypted e-mail messages.

The recipient scope allows the administrators to focus on all recipients that are in a specific location in Active Directory.

On the child domain "SEC. IBM. COM" , create a user using the Active Directory users and computer snap in for the AIX machine.

The sender or recipient is a mail-enabled user, distribution group, or public folder that exists within the organization's Active Directory.

Active Directory sites represent a logical grouping of computers within Active Directory that have reliable connectivity.

Auditing is used to record which users attempt to access Message Queuing objects in Active Directory.

The password policies for an Active Directory domain are initially configured in the Default Domain Policy Group Policy Object (GPO).

A service account in Active Directory is an account whose sole role in life is to exist to support some application or service.

You can apply this security template to a local computer or you can import it to a Group Policy object (GPO) in Active Directory.

Schema attributes define all the properties that can be used to describe the objects that are stored in Active Directory.

However, working with Active Directory permissions that are related to Microsoft Exchange can be a complex task.

MIIS 2003 synchronizes the GALs, even if the source or target forest is in mixed mode and is running Active Directory Connector (ADC).

The Edge Transport Server Role in Exchange 2007 has been designed specifically to be operated outside of an Active Directory forest.

If the user's mailbox is in the same Active Directory site as the Client Access server, the user is connected directly to their mailbox.

In other words, any mailbox-enabled or mail-enabled object in an Active Directory forest that has Exchange installed is listed in the GAL.

Problems that occur if Active Directory object attributes are incorrectly modified may not be resolved until you reinstall the software.

The following figure illustrates the relationships between the Unified Messaging objects that are found in Active Directory.

Class with the specified identity reference, access control type, child object type, and Active Directory security inheritance information.

RootDSE attributes are used to retrieve distinguished names of the domain, schema, and configuration containers of the Active Directory.

If more than one remote Active Directory site has the same value for the least cost routing path, the first server on the list is selected.

The Active Directory Installation Wizard (Dcpromo. Exe) promotes Windows Server-based computers to be domain controllers.

If SSL fails, a second attempt to connect to Active Directory using sign-and-seal will be made.

An unhandled exception occurred while an Active Directory configuration change notification was being processed.

To delete the server and its object from Active Directory, you remove Exchange Virtual Server using Cluster Administrator.

Microsoft Exchange System Attendant does not have sufficient rights to read Exchange configuration objects in Active Directory.

Another installation issue involves establishing the appropriate security for both Lotus Domino and Active Directory administrators.

Circular logging for Active Directory is enabled on domain controllers and cannot be turned off.

Using tracing involves setting up Active Directory and specifying a report queue for the Message Queuing enterprise.

The name of the Edge Subscription in Active Directory will match this name.

This action allows you to select an Active Directory user account that is not already mailbox-enabled as the mailbox owner.

This parameter specifies the fully qualified domain name of the domain controller that writes this configuration change to Active Directory.

Verify that the various values on the Network Address attribute for the Server object are present in Active Directory.

Active Directory stores information about objects on a network and makes this information available to users and network administrators.

ADSI enables Windows applications and Active Directory clients to access several network directory services, including Active Directory.

Class exception is thrown when an Active Directory object is created and that object already exists in the underlying directory store.

In a cross-forest topology, a company has multiple Active Directory forests, each containing an Exchange organization.

Class with the specified identity reference, access control type, Active Directory security inheritance, and inherited object type.

The following steps list the procedure for removing the NTDS Settings object in Active Directory for a particular domain controller.

When you install more than one Hub Transport server in an Active Directory site, the connections are distributed.

In Active Directory or in ADAM, a Send connector is created as an object in a connectors container.

The Mailbox server accesses recipient, server, and organization configuration information from Active Directory.

Class with the specified identity reference, access control type, and Active Directory security inheritance information.

Class with the specified identity reference, access control type, property access, and Active Directory security inheritance.

Use for authentication: Determines whether Active Directory is automatically added to the computer's authentication search policy.

To resolve this warning, the parameter must be corrected in Active Directory to avoid future events.

Each Active Directory site that contains one or more Exchange 2007 Mailbox servers must also have at least one Hub Transport server.

SOX001019700148: This error may occur due to a corrupted Active Directory or corrupted Active Directory entries.

If the UM mailbox policy is deleted from Active Directory, the UM mailbox policy cannot be used when configuring UM-enabled users.

AttributeMapPasswordQuestion and attributeMapPasswordAnswer must be mapped to attributes in the Active Directory schema.

We recommend that you subscribe the Edge Transport server to the Active Directory site whenever possible.

Distribution groups are mail-enabled Active Directory objects that contain information about people within an Exchange organization.

Use this parameter to specify the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory.

Using Active Directory based group policy settings does not nullify the need for local security policy settings.

Class with the specified identity reference, Active Directory rights, access rule type, inheritance type, and inherited object type.

On the Active Directory Users and Computers console, right-click the new account that you created, and then click Properties.

If a connection agreement is not marked as a Primary, then the ADC (Active Directory Connector) will not create new objects.

The plug-in also supports Active Directory authentication policies, including password changes, expiration, and forced change.

The MTA password is stored in encrypted form in Active Directory, but this does not mean that MTA names and passwords are secure.

The Edge Transport server uses the Active Directory Application Mode (ADAM) directory service for storage of configuration information.

Active Directory Application Mode (ADAM) does not require or depend on Active Directory forests or domains.

Retrieves the replication metadata for a specific Active Directory object.

After the new Active Directory domain is established, create a user account in that domain to use as an administrative account.

The membership of the UDG has not been replicated to Active Directory.

This service uses. NET Passport authentication, rather than your organization's Active Directory authentication.

For more information about Unified Messaging Active Directory objects, see Overview of Unified Messaging Active Directory Objects.

Exchange organizations can include multiple Active Directory domains, but they cannot span multiple Active Directory forests.

Connecting to an Active Directory domain controller with the "Guest" account enabled is a potential security threat.

Direct trust means that the presence of the certificate in Active Directory or ADAM validates the certificate.

At minimum, each domain controller stores three NCs in its local copy of the Active Directory database.

Another method of populating Active Directory is to use Active Directory Migration Tool to clone the accounts in Active Directory.

ADC Connection Agreements between Active Directory and the SRS database are automatically established to enable directory replication.

Alternatively, you can force the Active Directory plug-in to map the user ID to Active Directory attributes that you specify.

Use the Set-ResourceConfig cmdlet to set resource property schema and resource locations on the Resource Config object in Active Directory.

The Active Directory account to which the Exchange mailbox is linked can be in either an enabled or disabled state.

A server in an Active Directory network that manages user logon and access to network and shared resources.

The following figure shows the location of these objects in Active Directory, as viewed with ADSI Edit.

When you click OK, Directory Access sets up trusted binding between the computer you're configuring and the Active Directory server.

This topic explains how you can configure permissions in Active Directory to correspond to your administrative model.

Creates a DirectorySearcher component instance that you can use to perform queries against the Active Directory.

Additionally, if the server is a domain controller, Active Directory uses this virtual server for SMTP directory replication.

User and group information can be migrated to Active Directory accounts and distribution lists.

Returns the replication metadata for a specific Active Directory object.

Your messaging environment requires a dependable Active Directory infrastructure.

This command sets generic Exchange attributes in Active Directory for a specified computer running Exchange 2007 only.

You cannot directly associate a mailbox in one Active Directory forest with an external user account.

Class with the specified identity reference, access control type, and Active Directory security inheritance.

Subscribing to a publication by locating it in Active Directory has been discontinued.

Check network connectivity between the Hub Transport server and Active Directory.

Problems that occur if Active Directory object attributes are incorrectly modified may not be resolved.

On the domain controller where you want the new global catalog, start the Active Directory Sites and Services snap-in.

A secure connection could not be made to an Active Directory Application Mode server.

A list of Hub Transport servers in the Active Directory site is then referenced to determine where to route the message.

Class with the specified identity reference, Active Directory rights, access rule type, object type, and inheritance type.

Takes advantage of an existing Active Directory structure.

Or, you may have to separate the administration of Active Directory objects and Exchange objects.

Additionally, you can use the Active Directory Service Interfaces (ADSI) tool to correct Active Directory entries that are not valid.

There are two locations in which UM properties are stored for a user: the Mailbox object and the user's Active Directory object.

All Active Directory schema class modifications support the setting of new attributes on existing objects.

The most probable cause of this situation is the improper restore of Active Directory on the local domain controller.

The first example is a simple configuration file using default mappings for Active Directory attributes.

The following Active Directory files are part of a System State data backup of a domain controller.

With the introduction of Active Directory, you can separate the administration of servers from the administration of recipients.

Gets a value indicating whether an e-mail address stored on the Active Directory server must be unique.

This account is not a domain account and has very limited access to Active Directory Domain Services.

If you specify a value of Local, the connector can only be used by other Hub Transport servers in the same Active Directory site.

Object to search and perform queries against an Active Directory hierarchy using Lightweight Directory Access Protocol LDAP.

In a non-Active Directory environment, you can edit registry settings to configure Automatic Updates.

Exchange System Manager uses Active Directory Service Interfaces (ADSI) to communicate with Active Directory.

Class represents the weekly schedule for an Active Directory replication.

All configuration and recipient information is stored in the Active Directory Application Mode (ADAM) directory service.

Active Directory will be unable to log on users while this condition persists.

Click Start, point to All Programs, point to Administrative Tools, and then click Active Directory Users and Computers.

From the Active Directory Connector Tool MMC snap-in, navigate to your recipient connection agreements.

The ActiveDirectoryMembershipProvider class will connect to an Active Directory, with these restrictions.

Entry in the Web. Config file that identifies the Active Directory server, Active Directory domain, or ADAM application partition to use.

Additionally, you can choose whether this Active Directory information replicates to other domain controllers.

This allows the command to access Active Directory objects that are currently not in the default scope.

NewPassword does not meet the complexity requirements defined by the Active Directory server.

The configuration settings for a storage group are stored in Active Directory.

Caching this information encourages consistent use of the same domain controller and a consistent view of Active Directory.

The name of the native Active Directory object to bind to.

When a configuration change occurs in Active Directory, a notification is sent to the service.

A message's recipients were resolved to a different e-mail address after an Active Directory lookup.

Class with the specified identity reference, Active Directory rights, access rule type, and inheritance type.

Use for contacts: Determines whether Active Directory is automatically added to the computer's contacts search policy.

This error may have been caused by network connectivity issues between Active Directory domain controllers and the Unified Messaging server.

Visual Studio Team System uses existing Active Directory domain controllers in a large scale deployment.

Click Start, click Control Panel, double-click Administrative Tools, and then double-click Active Directory Users and Computers.

Failed to read the message classification settings from the Active Directory for virtual directory "%1" under web site "%2" .

For more information about internal message routing, see Understanding Active Directory Site-Based Routing.

To explain further, suppose that two different mailboxes in the same database were assigned to two different Active Directory accounts.

Caching information from Active Directory for better performance when querying Active Directory.

To deploy Exchange, you need to begin with an established Active Directory infrastructure that is in a stable, working state.

Parameter that is set to the total number of matching membership users found in the Active Directory data store.

It is strongly recommended that you accept the recommendation in Active Directory Connector Tool.

Re-add the DNS service, or re-add the zones and configure them to be Active Directory integrated.

If you are using an Active Directory or ADAM server for the policy store, your connection string should be similar to the following example.

You can use the Set-Contact cmdlet to modify the settings of contact objects that are visible in Active Directory Users and Computers.

When you view an object's permissions, Active Directory permissions appear first in the list, followed by Exchange extended permissions.

When an object is deleted, Active Directory replicates the deletion as a tombstone object.

Starts Windows domain controller running Active Directory so that the directory service can be restored.

The Hub Transport server role contacts Active Directory when it performs message categorization.

Modify the default configuration of the Active Directory Application Mode (ADAM).

If you are responsible for both user and mailbox management, you need to have permissions to create a user object in Active Directory.

Group Policy in Active Directory can be linked to Active Directory sites, domains, and OUs.

Entries for servers that no longer exist, but that were not completely removed from Active Directory.

This sample demonstrates performing a paged search of the Active Directory using LDAP controls.

After the upgrade is complete, the server restarts, and then the Active Directory Installation Wizard starts automatically.

For more information about topology and service discovery, see Planning to Use Active Directory Sites for Routing Mail.

Enumeration specifies the access rights that are assigned to an Active Directory object.

The user tries to gain access to the mailbox before Active Directory replicates the information to the domain controller.

Class represents a domain controller in an Active Directory domain.

Both Outlook and Outlook Web Access retrieve digital certificates that are stored in Active Directory.

The connection to the Active Directory server is secured by digitally signing and encrypting each packet sent to the server.

The Mailbox server role stores configuration information about mailbox users and stores in Active Directory.

Zombie users are users that appear in an Access Control List (ACL) but not in Active Directory.

Retrieves all Active Directory classes in the schema that are of the specified type.

An Active Directory infrastructure must be in place before you deploy Exchange 2003.

When a match is found, the properties of matching Active Directory object are cached for later use.