host name

This line informs the proxy server to set the host name on the proxy request to that of the proxy server.

Since the header is for the virtual host name, not the name of the IIS server, it rejects the request and sends a "401" back to the client.

One other step that should also be performed here is checking the name on the certificate against the host name used to connect to it.

If you use HOST_NAME in a filter clause and override the HOST_NAME value, you might have to convert data types by using CONVERT.

If you use HOST_NAME in a filter clause and override the HOST_NAME value, it might be necessary to convert data types using CONVERT.

Implementing these types of environments requires a naming structure that accounts for more than just a single host name on a system.

Specifies whether the system should verify that the name on the certificate matches the server host name before using the certificate.

On the next dialog, local host name specifies the fully qualified name of the host on which the authorization server will reside.

And since each node should be configured with a host name that corresponds to the node name, network access is simplified, as well.

If you do not know your host name, you can find it by looking in the Cast Iron error log.

There was some special reason for this. Today, we call it Han from the host name, or Ji-Han from old callings, or Shu-Han on the bottom.

r is replaced by the remote login user name, %h is replaced by the target host name, and %p stands in for the port used for the connection.

Verify that this host name can be resolved from another computer, and then click Next.

Note that you are entering the file name for the ssvnc configuration file, not the host name, and do not include the directory.

The configuration of that package will ask for your username, password and host name.

After it's done with all of that, it will ask you for a host name.

Instead, use a virtual host name to avoid the name-clash with the "Computer" object in Active Directory for the Web server computer.

Indicates whether or not the host name of the logging machine should be included in the output.

Server (host) name to be used for connecting to a database project.

You need to add the host name where the application server is running and where the service needs to be deployed, as shown in Listing 3.

In normal, it is always your VOIP provider's servers address. This field can be filled with IP address or host name.

Check to be sure that there is no host name being assigned in any of the network sections.

When this happens, select the component machine by IP address or host name to see the detail log and trace files for the failure.

On the Connect tab, specify the host name of your server or localhost if it is on the same machine that you are debugging.

In DNS, add a second host record that maps to the same IP address as the does the original host name as shown in Figure 12.

Simply follow the format of the existing lines, and add an entry pointing your application's host name to its future IP address.

The host name of the LPAR that hosts the database is configured in WebSphere and is contained as a binary entry in the transaction logs.

In this case, it will also display the host name and IP Address of the clone to which the request was sent.

On the next dialog, enter a Host name and the specific host information pertaining to your configuration, then select.

Click the server name, and all the details including username, password, and host name are automatically filled in for you by OAT.

The client needs two pieces of information: the host name and the port number to which the connection will be established.

Type the host name or IP address of the computer or network to which you are connecting .

Where the authority is typically just a host name.

JNDI is a Java standard that allows you to abstract the actual name of the JMS queue, topic, or even host name.

On the next window, enter the node name and host name for your installation.

Gets or sets the host name used for the device when connecting to the Publisher.

Host_name should be NULL if this function is not used to dynamically filter the publication.

More likely, you need to move the runtime from one machine to another, which requires a change to the host name as part of that process.

If the new client comes with a new host name, the former host name must be deleted in the back-end systems.

The host name was not found during the DNS lookup. Contact your system administrator if the problem is not found by retrying the URL.

The portlet will display host name, host IP Address, and the application server name for each of the clones, as shown in Figure 33.

When more than one IP address is associated with a host name, a DNS resolution normally returns only the first IP address.

Method asynchronously queries a DNS server for the IP addresses that are associated with a host name.

This constructor allows you to initialize, resolve the DNS host name, and connect in one convenient step.

Furthermore, the symbolic name used by applications and regular users should only be an "alias" pointing to a host name.

The last one is for a different host name, assuming the computer has multiple host names.

The IP address and the host name should be separated by at least one space.

To assign a host name ( URL) to an ever-changing IP address is called Dynamic DNS.

host-name is the name assigned to the IP address of the client by the DNS.

The value specified for this parameter can be a host name or a string representation of an IP address.

Furthermore, the symbolic name used by applications and regular users should only be an alias and point to a host name.

And makes a synchronous connection attempt to the provided host name and port number.

Each network adapter should be configured with a boot address and associated host name.

Class defines a network endpoint, including host name, network port number, and transport type used to make the connection.

Repeat the preceding command for each additional network (host name) that you want to disable for continuous replication.

Method checks that the host name provided meets the requirements for a valid Internet host name.

The host name or IP number on which the MobiLink synchronization server should listen.

It does not, however, perform a host-name lookup to verify the existence of the host.

Any alias can also be removed using similar commands, and the node will revert to resolving the host name as an IP address.

When you create a cloud instance in a private VLAN, the host name for the instance is not set correctly.

Important: If possible, use the same response files that were used in building the primary site by updating the host name.

You can omit these steps if the custom Web site is mapped to a specific IP address, and the host name resolves to the IP address.

If you're using a different host or port number for your server, you also need to modify the host-name and host-port values.

After you click Add, as shown in Figure 14, you are prompted to enter a host name (the output when running the hostname command).

The domain name is the part of your Internet address to the right of your host name.

The server name can be expressed as a host name or as a fully qualified domain name (FQDN).

The host name or IP address that you specify is what other nodes will use to communicate with the node being created.

Where daemon host is the host name or IP address of the client machine that you found in the previous step.

The Host header, which specifies the host name and port number of the resource being requested.

These connection properties include connection type, server host name, and the port that will be used to connect to the server.

Indicates whether the host name from the client login record is replaced with the Windows network user name.

Type the fully qualified hostname that you assigned to this computer on the Host name tab.

Because you can have many windows open at once, it's a good idea to set this to the short host name!

Default is none at all meaning the host name of the server which generated the cookie according to cookies specification.

Host: Host name or IP address to which the port will bind.

As an additional hint it's a best practice to specify the domain name for host rather than an actual host name.

The host name of the server and the filename of the database is already defined by the Web Deployment Descriptor (web. xml).

The command requires a parameter for the host name of the computer running the Deployment Manager process.

This means that you need a second host name for the server SPN that you want to use.

Using nslookup can provide host name information as well as IP addresses associated with the host name.

Add the name of the repository, the host name of the LDAP Server, and the port number (default is 389).

Value supplied when a subscription is filtered by the value of the HOST_NAME function.

The sample takes two command line parameters: the host name of the machine Business Events is running on and the application port number.

Specify your host connection information, including server name, network protocol, host name, service, and port.

The portal host name and port can be used to access the cache monitor application.

Interested peers detect this message, extract the host name and port, and use this information to establish a communication channel.

To do this, use the host name of the application server and port when accessing a Lotus Connections service.

The stale cache occurs because Java "remembers" the IP resolution of a host name.

If -h [host_name] is the local host in this command, it automatically configures the LDAP server on this host.

In the Enter the virtual host IP address or fully qualified domain name field, enter the fully qualified host name for the Web server.

In the ClearQuest Bridge section, enter the host name (recommended) or IP address to the ClearQuest Change Management Server.

Type the host name or the Internet Protocol (IP) address of the computer that you want to connect to, and then click Next.

This field should be retrieved from the certificate and verified against the host name.

Events are generated for each link found and each page read, returning URL, meta tags, document type, referrer, host name, . . .

This is usually the DNS host name or IP address of the server.

Gets the host name of the server for the current binding to this directory object.

The transport server properties can also be configured to query a specific DNS server for host name resolution.

Configure the portlet preferences for the host name and port of the remote Process Server.

Take note of the address attribute's value as the appliance automatically configures the address based on the host name provided.

The name resolver service could not resolve the proxy host name.

Of course, you will likely have a proper host name and port setup as a virtual server for your environment.

The name is not an official host name or alias.

Because it is not part of the SSL standard, OpenSSL does not check the certificate's name against the host name.

If you get a javax. naming. CommunicationException, verify the host name and port of the LDAP server.

and provide the host name of the source LPAR environment as value of Host name of machine field (for instance, was_src_lpar).

A host name is a reference to an IP address, and an IP address is associated with one or more network adapters.

The value of the address attribute should be a valid IP address or host name.

Once again, an ACE_INET_Addr object is created with the port number (the host name is not required: by default, it's the current host).

The name resolver service could not resolve the host name.

The search parameter provides a list of domains to the resolver to use when resolving an IP address or host name.

The virtual host name that you created for SSL is displayed next to the Scope button.

In addition it will return your ISP Customer ID, Host name and Network IPs from all the Computers connected to your Network, if any exist.

Table 5 also shows a host name called "bosapora00, " which happens to correspond with the node name of the system.

The previous section explained the problem with SPN name-clashes due to using the host name of the computer objects in AD.

For each pattern, add an IP address or host name, assign a part type the component and specify the required parameter values.

The domain name system converts the host name on the Internet to the ip address location, enabling users to find their desired web site.

In the Host name (or IP address) field, type the IP address of your instance.

The section name typically is the host name of the server that contains the Sybase Server you want to access.

The IP address should be placed in the first column followed by the corresponding host name.

If bind or dns is specified in the hosts record, use nslookup to ensure that the host name resolves through DNS.

Change the IP address (or host name) on the backup server to resolve to the IP address (or the host name) of the original server.

Table 1 also shows a host name called abcdefgh00, which happens to correspond with the node name of the system.

Determine the host name, host IP address, and the service name or port number for both the primary and the standby database server.

In DNS, add an alias, or (CNAME) record that provides the second host name as shown in Figure 11.

The host name needs to be a resolvable value.

Host name, if not dynamically assigned, must be assigned.

A host name should be viewed as being independent from any node, managed system, or data center.

Absolute URLs, on the other end, either include a host name or give the path from the root of the Web site.

Host: Name something you wouldn't want the police to find in the trunk of your car.

The output of the command should tell you the host name assigned to this IP address.

If the host you need is not on the list, click Add and provide the host name and port number.

For each component machine, you need enter the machine's host name or IP address, and the part type assign to the machine.

The host name of the database that is configured to be used by WebSphere must also be carefully managed.

The host name or IP address of the machine hosting the target WebSphere MQ queue manager.

Specify the host name and port number of the back-end MDM Server.

Ensure that you have provided the correct database host name, database port, and database name of the database that you are monitoring.

Wrappers do a forward and reverse lookup thus checking the IP against the host-name.

This parameter specifies the external host name to use in the Outlook profiles for users who are enabled for Outlook Anywhere.

Policy Server host name is the host name used by the policy server to contact this server.

The host name of the database server to be used is stored in the app. Config file.

Remember to substitute the fully qualified host name for the localhost.

Property contains the fully qualified DNS host name or IP address of the server.

Determines whether the specified host name is a valid DNS name.

Keep trying indefinitely to resolve the # host name of the OpenVPN server.

Your host name must appear in any of the fields after the first field (the IP address).

In the Server list dialog window, choose the Lotus Mashup Center server and fill in the correct host name.

Right-click on the zone just created and select Enter the host name and the IP address of the host.

Add two lines of code to the controller servlet to make Java aware of the SOCKS proxy host name and port.

On theJVM Connection Details panel (Figure 9), specify the host name you wish to connect to and accept the default port number.

Host name A host name is a domain name assigned to a host computer.

A host name is associated with a network adapter.

You can tailor the prompt to include the host name, your login name, or some other display characters.

Substitute your fully qualified host name for the localhost.

Ask your service provider for information about host name (or IP address) and port number.

Ideally, you've scripted all your configuration processes using wsadmin so all you need to do is rerun your scripts using the new host name.

Determine the internal host name of your AMI using the following command: hostname.

If a server has multiple network interfaces, ensure that the HADR host name or IP address maps to the intended interface.

On the lowest priority node, right-click the host name, select Control Host, and click Stop.

In the Host System name field, set a Host name under which the imported physical model will be grouped in Information Server.

Host name resolution is based primarily on DNS, and DNS is a critical network service.

Connects the client to a remote TCP host using the specified host name and port number.

Object associated with the specified Internet host name.

This step is required if your host name has changed to a new host name.

This data column is populated if the host name is provided by the client.

Enter the database host name, the port number, and the database name, and then click Test connection.

Change all occurrences of wse62 to the host name of the server running WebSphere Sensor Events.

This parameter specifies whether to allow or prevent access to files on a server host name that is not included in Allow and Block lists.

Type the host name or IP address of the computer where you are connecting, and then click Next.

Exchange 2003 relies on host name resolution for both local and external SMTP-based messaging systems in the network.

By using what is essentially a stupid Java trick, you avoid reusing the host name of the series of methods you want to execute.

Is the host name of your websphere system.

Which is compared against the host name of the Subscriber in a parameterized filter.

Using NLB may cause the host name query to fail during certificate validation.

Enter the Server parameter as a host name or a fully qualified domain name (FQDN).

Let's start simply by changing the host name of the deployment manager machine in your cell.

In the Address to bind to field, enter the Internet address or host name to bind the service to.

This file tells the server how to perform host name resolution, much like how the nsswitch. conf file works on Solaris servers.

Migrate the Web server to a different host name.

The destination is specified by the host name and port number.

You can do this by adding the new host name to each virtual host that WebSphere Commerce is configured to use.

Specifies a string value indicating the host name to append to the user alias when the SendEmailToUserAlias is set to true.

This column contains the host name in either symbolic or numeric format.

How to replace a host name in a test is now documented in Help.

In this example, it contains both the short and long host name (the host's name is tardis).

Gets the host name of the computer that hosts this ADAM instance.

In the New Server window that displays, set the Server's host name field to localhost.

A string that contains the DNS host name or IP address of the server.

You need to specify the host name or IP address of the full repository queue manager.

Remote Assistance connection could not be established because the remote host name could not be resolved. Please try again.

Using the standard C string functions or your favorite string library, compare the common name and the host name.

Gets the DNS information for the specified DNS host name.

Figure 4 shows the node and host name assignment panel for the profile creation wizard.

Tip: The host name and port number must match the target process server.

Find the host name or IP address of the client machine.

HOST: The host name that ControlClient wants to connect to, defaulted to localhost.

The type of the host name is not supplied.

This data column is populated if client provides the host name.

Most browsers only allow two connections per host name.

An error is encountered when resolving the local host name.

The host name or client IP address is needed to start the debug engine.

The AutoYaST file does not contain system specific information such as an IP address, host name, etc.

The client parses the requested URL for the host name.

The host name contain invalid characters.

Enter the replica name or leave this field blank to use the host name.

Host name used when connecting to the Publisher.

To create an instance of AdminClient, you need to pass the appropriate host name, port number, and connector type.

Enter the host name and port number for the replica you are creating.

In this case, WC_demo would take priority because it is an exact match with the host name of the HTTP request.

The server's certificate provided in the handshake should have a name on it that matches the server's host name.

If the host names are not identical, use a virtual IP to resolve to the same DMGR host name.

Establishes a default remote host using the specified host name and port number.

They will need the MIB, and you will need the host name, port, and community string for the SNMP Manager.

The -n switch specifies that host name-to-IP address resolution shouldn't be performed.

The host name of my computer is "King" .

It is likely an incorrect host name, such as a server name with an additional suffix.

Scripts to deal with host name changes.

The host name query in the certificate selection process may fail because of incorrect DNS or machine name configuration.

Type the IP address or host name of the instance and type the user name idcuser.

Click Next and verify (or change) the host name and node name.

The following example shows how to disable a continuous replication host name called NODE2NET for a clustered mailbox server named EXCLUS.

adlook - adlook (Address Lookup tool) is a multi-threaded host name and technical contact lookup tool.

Your database host name displays in the Host Name field.

in the resulting dialog , change your host name and domain name , and uncheck the.

The host name specified in the URI formed by combining.

The host name that it asks for is the original aliased host name.

That indicates the type of the host name.

Information about the specified DNS host name.

This is a listed by the registry is the process of running FOSS. By modifying the host name could give remote host process.

Gets the host name for the local computer.

In the SocksCap Settings dialog box, enter your SOCKS server host name and port.

If these debug URLs work, try displaying the store that you have published using the proxy server's host name.

That contains the computer host name.

When used, this option restricts the access to TCP services based on the host name or IP address.

In this example, the proxy host name is commerce. mycompany. com and the content host name is content. mycompany. com.

Enter localhost in the Host name entry field.

One of the nodes in my cluster has the host name x01.

The Host name from which the user is viewing the current page.

Enables the client to specify a host name for use.

Address For UDP, this is ip: port-number, where ip is an IP address or host name.

The host name of the Jabber server.

Defines host name types for the.

If you specify a host name, you need not worry about whether your system is configured for IPv4 or IPv6.

The host name for this server is KEEL.

Property specifies that a server name is a fully-qualified DNS host name.

The host name of the proxy server.

Gets the DNS host name or IP address of the server that is associated with this endpoint.

A String containing the host name.

It is mandatory that every URI must start with txws after host name and port number.

Could not obtain IP address from host name.

This property is true if a server name is a fully-qualified DNS host name.